A blast nozzle accelerates the air and abrasive as the mixture exits the end of the hose. The taper and length of the nozzle's inlet and outlet determine the pattern and velocity of the abrasive exiting the nozzle. The composition of the liner material determines its resistance to wear.

(click image to enlarge)

Quick Overview

Expected life with expendable abrasives is up to 500 hours
Durable urethane jacket
Non-binding contractor threads
42% lighter than tungsten carbide

Interested in this item or want more information?

Phone:
Email:

Can't find what you want? Give us a call and we can help you find it.

Details

The operator inserts the nozzle washer into a contractor-thread nozzle holder and screws in the nozzle, turning it by hand, until it seats firmly against the washer.

With all related equipment correctly assembled and tested, the operator points the nozzle at the surface to be cleaned and presses the remote control handle to begin blasting. The operator holds the nozzle 18 to 36 inches from the surface and moves it smoothly at a rate that produces the desired cleanliness. Each pass should overlap slightly.

The operator must replace the nozzle once the orifice wears 1/16-inch beyond its original size.

Additional Information

Manufacturer: Clemco

Search: